#
Mobile Frpsupply.com
 
HomeProductsCustom-madeContact UsFAQAbout Us
 



FRP Stub Flanges

  • Manufactured to conform to PS 15-69 & ASTM D5421.
     
  • C-veil and Nexus + 2 Mats 100mil resin rich corrosion liner.
     
  • Hand laid up as per ASME RTP-1 Table 2A-2, Integral Type II construction, woven roving used continuously from flange face to hub for 3 inches size and larger.
     
  • Uniform external surface and stub end surface prepared for immediate bonding.
     
  • Bolt holes of drilled flanges are spot-faced and coated with resin.
     
  • Standard inventory available in Vinyl Ester Resin, Derakane Momentum 411-350, 470-300, 510C-350, & Hetron 922, and their equivalents. Supply using other resin systems possible.
     
  • MEKP (C + N Liner) & BPO (C + 2N Liner) cure system



FRP Blind Flange

  • Manufactured to conform to PS 15-69 & ASTM D5421.
     
  • C-veil and Nexus + 2 Mats 100mil resin rich corrosion liner.
     
  • Hand laid up as per ASME RTP-1 Table 2A-2, Integral Type II construction, woven roving used continuously for 3 inches size and larger.
     
  • Bolt holes of drilled flanges are coated with resin.
     
  • Standard inventory available in Vinyl Ester Resin, Derakane Momentum 411-350, 470-300, 510C-350, & Hetron 922, and their equivalents. Supply using other resin systems possible.
     
  • MEKP (C + N Liner) & BPO (C + 2N Liner) cure systems.



FRP Manway with Cover

  • Manufactured to conform to PS 15-69 & ASTM D5421.
     
  • C-veil and Nexus + 2 Mats 100mil resin rich corrosion liner.
     
  • Hand laid up as per ASME RTP-1 Table 2A-2, Integral Type II construction, woven roving used continuously from flange face to hub for 3 inches size and larger.
     
  • Uniform external surface and stub end surface prepared for immediate bonding.
     
  • Bolt holes of drilled flanges are spot-faced and coated with resin.
     
  • Standard inventory available in Vinyl Ester Resin, Derakane Momentum 411-350, 470-300, 510C-350, & Hetron 922, and their equivalents. Supply using other resin systems possible.
     
  • MEKP (C + N Liner) & BPO (C + 2N Liner) cure systems.



FRP Elbows

  • Manufactured to conform to PS 15-69 & ASTM D6041.
     
  • C-veil and Nexus + 2 Mats 100mil resin rich corrosion liner.
     
  • Hand laid one piece construction.
     
  • 90°Elbow radius equals to 2 times of the Inside Diameter for sizes not larger than 3 inches, and 1.5 times of the Inside Diameter for sizes 4 inches and larger.
     
  • Standard inventory available in Vinyl Ester Resin, Derakane Momentum 411-350, 470-300, 510C-350, & Hetron 922, and their equivalents. Supply using other resin systems possible.
     
  • MEKP (C + N Liner) & BPO (C + 2N Liner) cure systems.



FRP Equal Tee

  • Manufactured to conform to PS 15-69 & ASTM D6041.
     
  • C-veil and Nexus + 2 Mats 100mil resin rich corrosion liner.
     
  • Hand laid one piece construction.
     
  • Standard inventory available in Vinyl Ester Resin, Derakane Momentum 411-350, 470-300, 510C-350, & Hetron 922, and their equivalents. Supply using other resin systems possible.
     
  • MEKP (C + N Liner) & BPO (C + 2N Liner) cure systems.



FRP Coupling
(FW)

  • Manufactured to conform to ASTM-D2996.
     
  • NPT Threads are Filament Wound.
     
  • C-veil and Nexus resin rich liner is built after threads for maximum corrosion.
     
  • Filament wound mostly, one piece construction with higher fiberglass content(about 60%) suitable for high working pressure application.
     
  • Reinforcement is continuous throughout.

  • Exterior machined finish, without top coat.



FRP Coupling
(HL)

  • Manufactured to conform to PS15-69.
     
  • NPT Threads are Filament Wound.
     
  • C-veil and Nexus resin rich liner is built after threads for maximum corrosion.
     
  • Hand Laid one piece construction with higher resin content(about 65%) suitable for high corrosion application.
     
  • Reinforcement is continuous throughout.

  • Exterior machined finish, without top coat.


FRP Filament Wound Pipe


  • Manufactured to conform to ASTM-D2996.
     
  • C-veil and Nexus + 2 Mats 100mil resin rich corrosion liner.
     
  • 150psi ratings are suitable for operating temperatures to 220°F.
     
  • 54 to 56 degree Helical Winding for maximum strength suitable for high working pressure.
     
  • C-veil + UV Inhibitor with Glossy exterior finishing for extra weathering and corrosion protection.



FRP Hand-Laid Pipe

 

  • Manufactured to conform to PS 15-69 and ASTM-D6041.
     
  • C-veil and Nexus + 2 Mats 100mil resin rich corrosion liner.
     
  • 150psi ratings are suitable for operating temperatures to 220°F.
     
  • Uniform thickness and 100mil resin rich liner hand laid up suitable for high corrosion but lower working pressure application.
     
  • C-veil + UV Inhibitor with resin(no wax) top coat for superior corrosion resistance.



FRP Nipple

  • Manufactured to conform to PS15-69.
     
  • NPT Threads.
     
  • C-veil and Nexus + 2 Mats 100mil resin rich corrosion liner.
     
  • Hand laid one piece construction; Reinforcement is continuous throughout.
     
  • Exterior machined finish, without top coat.



FRP U-Vents

  • Manufactured to conform to PS15-69.
     
  • C-veil and Nexus + 2 Mats 100mil resin rich corrosion liner.
     
  • Hand laid one piece construction; 90°Elbow radius equals to 1.5 times of the ID.
     
  • Standard inventory available in Vinyl Ester Resin, Derakane Momentum 411-350, 470-300, 510C-350, & Hetron 922, and their equivalents. Supply using other resin systems possible.
     
  • MEKP (C + N Liner) & BPO (C + 2N Liner) cure systems.



FRP Lay-up Rollers and Brushes

  • Hand Lay-up tools for FRP fabricator's choices. Competitive cost and very handy to apply resin and poke out airs.
Site Mailing List  Sign Guest Book  View Guest Book 

Transaction Processing

 

ICP05008673